beautypg.com

Dial tone detect, Busy tone detect, Zn recall stored profile – Toshiba 6100 User Manual

Page 213: Cn data carrier detect (dcd) control

background image

C-7

A

PPENDIX

C

X5

Enable

Enable

OK, RING, NO CARRIER, ERROR,

NODIALTONE, BUSY, CONNECT

, RRING, NO BONGTONE,

DELAYED, BLACKLISTED, REORDER,

WARBLE, CALL WAITING DETECTED

Dial tone detect

Disabled:

The modem dials a call regardless of whether it detects a

dial tone.

Enabled:

The modem dials only upon detection of a dial tone, and
disconnects the call if the dial tone is not detected within
10 seconds.

Busy tone detect

Disabled:

The modem ignores any busy tones it receives.

Enabled:

The modem monitors for busy tones.

Result Codes:

OK

n=0,1,2,3,4,5

ERROR

Otherwise

Zn

Recall stored profile

The modem performs a soft reset and restores (recalls) the configura-
tion profile according to the parameter supplied. If no parameter is
specified, zero is assumed. Either Z0 or Z1 restores the profile.

Result Codes:

OK

n=0,1

ERROR

Otherwise

&Cn Data Carrier Detect (DCD) control

Data Carrier Detect is a signal from the modem to the computer
indicating that a carrier signal is being received from a remote modem.
DCD normally turns off when the modem no longer detects the carrier
signal.

Appendix C