Using the internal modem, Region selection, Using the internal modem -19 – Toshiba 6100 User Manual
Page 113: Region selection -19
O
PERATING
B
ASICS
4-19
Using the internal modem
Using the internal modem
This section describes how to make settings and connect the modem. Refer to the
computer’s online help files for more information. Refer also to the online help files
for your modem software.
NOTE: The internal modem does not support the voice functions
described in the help files. All data and fax functions are supported.
CAUTIONS: 1. In case of a lightning storm, unplug the modem cable
from the telephone jack.
2. Do not connect the modem to a digital telephone line.
A digital line will damage the modem.
Region selection
Telecommunication regulations vary from one region to another, so you will need to
make sure the internal modem’s settings are correct for the region in which it will be
used.
1.
a. In Windows XP, click
start
, point to
All Programs
, point to
TOSHIBA
Internal Modem
and click
Region Select Utility
.
NOTE: Do not use the Country/Region Select function in the Modem
setup utility in the Control Panel if the function is available. If you
change the Country/Region in the Control Panel, the change may not
take effect.
b. In Windows 2000, click
Start
, point to
Programs
, point to
TOSHIBA
Internal Modem
and click
Region Select Utility
.
2.
The Region Selection icon will appear in the Windows Task Bar.
Figure 4-16 The Region Selection icon (Windows XP)