Toshiba 6100 - Manual (Page 194)

User's Manual
9-22
T
ROUBLESHOOTING
A CONNECT display Check the error control setting in your
is quickly replaced by communications application.
NO CARRIER
You can also use the AT\N command. Refer to
the online help files for Appendix C,
AT Com-
mands .
Character display In data transmission, make sure the parity bit
becomes garbled and stop bit settings correspond with those
during a of the remote computer.
communication
Check the flow control and communication
protocol.
You cannot receive Check the rings before auto answer setting in
an incoming call your communications application.
You can also use the ATS0 command. Refer to
the online help files for Appendix D,
S-registers .
If problems persist, contact your dealer.
Standby/Hibernation
Problem Procedure
The system will Is Windows Media™ Player open? The system
not enter might not enter Standby/Hibernation, if Windows
Standby/Hibernation Media Player is either playing a selection or
finished playing a selection. Close Windows
Media Player before you select Standby/Hiberna-
tion.
If problems persist, contact your dealer.