Toshiba 6100 - Manual (Page 148)

User's Manual
7-6
HW S
ETUP
AND
P
ASSWORDS
Device Config
Device Configuration
This option lets you set the device configuration.
All Devices BIOS sets all devices.
Setup by OS Operating system sets devices that it can control. (Default)
Parallel/Printer
This tab lets you set the Printer Port Type. Use the Windows Device Manager to
make settings for the Parallel port.
Parallel Port Mode
The options in this tab are ECP and Standard Bi-directional .
ECP Sets the port type to Extended Capabilities Port (ECP). For
most printers, the port should be set to
ECP . (Default)
Standard This setting should be used with some other parallel
Bi-directional devices.
Pointing Devices
Pointing Devices
This tab lets you select Auto-Selected and Simultaneous .
Auto-Selected If a PS/2 mouse is connected to the computer when you
turn on the power, the PS/2 mouse is enabled and the
AccuPoint II is disabled. Otherwise, the AccuPoint II is
enabled. (Default)
Simultaneous Enables both the AccuPoint II and a PS/2 mouse.