Pc cards, Installing a pc card, Pc cards -2 – Toshiba 6100 User Manual
Page 156: Installing a pc card -2, Refer to chapter 8, Optional devices, For details
8-2
User’s Manual
O
PTIONAL
D
EVICES
PC cards
The computer is equipped with a PC card expansion slot that can accommodate two
5 mm Type II cards or one 10.5 mm Type III card. Any PC card that meets industry
standards (manufactured by TOSHIBA or other vendor) can be installed. The slots
support 16-bit PC cards, including PC card 16’s multifunction card and CardBus PC
cards.
CardBus supports the new standard of 32-bit PC cards. The bus provides superior
performance for the greater demands of multimedia data transmission.
Installing a PC card
Two PC card connectors are located one above the other on the left side of the
computer. Both connectors are accessed from the same slot. You can install two
Type II cards, one in each connector, or one Type III card in the bottom connector.
Windows’ hot-install feature lets you install PC cards while the computer’s power is
on.
NOTES: 1. Do not install a PC card while the computer is in standby
or hibernation mode. Some cards might not work properly.
2. An HDD or CD-ROM connected to a 16-bit PC card, might
affect the performance of the computer’s sound system and
data transmission, including slower transmission speeds
and dialing errors.
To install a PC card, follow the steps below.
1.
Insert the PC card.
2.
Press gently to ensure a firm connection.
Figure 8-1 Inserting the PC card
PC
CARD