Pointing device, Pointing device -16, Accupoint ii – Toshiba 6100 User Manual
Page 188: Ps/2 mouse
User's Manual
9-16
T
ROUBLESHOOTING
Make sure your software is configured to recog-
nize the printer. Check your printer and software
documentation.
Printer error
Check your printer documentation.
If problems persist, contact your dealer.
Pointing device
If you are using a PS/2 mouse, also refer to Chapter 8,
your mouse documentation.
AccuPoint II
Problem
Procedure
On-screen pointer
If a PS/2 or serial mouse is connected, check
does not respond to
the HW Setup window. The
Pointing Device
AccuPoint II operation
option
should be set to
Simultaneous
to use
both the AccuPoint II and an external PS/2
mouse.
If problems persist, contact your dealer.
PS/2 mouse
Problem
Procedure
On-screen pointer
Check that the PS/2 mouse cable’s 6-pin
does not respond to
connector is firmly connected to the PS/2 mouse/
PS/2 mouse operation
keyboard port.
You may have connected the mouse after turning
the computer on. Turn off the computer, make
sure the mouse is firmly connected and turn the
computer back on.