Radio characteristics – Toshiba 6100 User Manual
Page 237
F-7
A
PPENDIX
F
Appendix F
Protocol
Acknowledgment (ACK)
Data Rate
n
High
11 Mb/s
n
Medium
5.5 Mb/s
n
Standard 2 Mb/s
n
Low
1 Mb/s
The cards use an automatic Transmit Rate Select
mechanism.
Radio characteristics
Radio characteristics of Wireless LAN cards may vary according to:
◆
Country/region where the product was purchased
◆
Type of product
Wireless communication is often subject to local radio regulations. Although
Wireless LAN networking products have been designed for operation in the license-
free 2.4 GHz band, local radio regulations may impose limitations on the use of
Wireless communication equipment.
NOTE: Refer to the flyer Information to the User for regulatory informa-
tion that may apply in your country/region.
Table F-4 Radio characteristics
R-F Frequency Band
2.4GHz (2400-2483.5 MHz)
Modulation Technique
Direct Sequence Spread Spectrum
n
CCK for High & Medium Transmit Rate
n
DQPSK for Standard Transmit Rate
n
DBPSK for Low Transmit Rate
Spreading
11-chip Barker Sequence
Bit Error Rate (BER)
Better than 10
-5
Nominal Output Power
15 dBm
Transmit Rate
High
Medium
Standard
Low
Speed
Speed
Speed
Speed
11 Mb/s
5.5 Mb/s
2 Mb/s
1Mb/s
Receiver Sensitivity
-83 dBm
-87 dBm
-91 dBm
-94 dBm
Delay Spread
65 ns
225 ns
400 ns
500 ns
(at FER of <1%)