Toshiba 6100 - Manual (Page 171)

8-17
O
PTIONAL
D
EVICES
PS/2 keyboard
NOTES: 1. How the computer treats the connection to a PS/2 mouse
depends on the setting for Pointing Devices under
the HW Setup program. If Simultaneous is selected, you
can operate both the AccuPoint II and the PS/2 mouse. If
Auto-Selected is chosen, the AccuPoint II is disabled
when a PS/2 mouse is connected.
2. If you connect a PS/2 mouse to the computer while it is in
Standby mode, you will not be able to use the mouse when
you turn the computer on.
To connect a PS/2 mouse:
1. Turn the computer off.
2. Connect the PS/2 mouse to the PS/2 keyboard/mouse port on the computer or
the mouse port on the optional Advanced Port Replicator, pressing gently to
assure a firm connection.
3. Turn on the computer.
To disconnect the mouse, turn off the computer and pull out the mouse connector.
Consult your mouse manual for instructions on how to install necessary software.
PS/2 keyboard
Use the PS/2 keyboard/mouse port on the computer or optional Advanced Port
Replicator to connect a PS/2 keyboard. When an external keyboard is connected,
you can use both the external keyboard and the computer’s internal keyboard. To
connect a PS/2 keyboard:
NOTE: If you connect a PS/2 keyboard to the computer while it is in
Standby mode, you will not be able to use the keyboard when you turn
the computer on.
1. Turn the computer off.
2. Plug the PS/2 keyboard connector into the PS/2 keyboard/mouse port on the
computer or the keyboard port on the optional Advanced Port Replicator,
pressing gently to assure a firm connection.
3. Turn on the computer.
To disconnect the keyboard, turn off the computer and pull out the keyboard
connector.