Oki lan 3100e - Manual (Page 74)

68 OkiLAN 320e Network Card
Oki LPR for Windows 95/98/
NT4.0/2000/Me
What is Oki LPR Utility?
Oki LPR Utility is a utility for printing to Okipage 14i
printer connected to Ethernet, from Windows 95/98/
NT4.0/2000/Me, using the LPR function of the TCP/IP
Protocol.
Operating environment
The utility runs on a computer to which the network
adapter that supports TCP/IP has been installed.
Setting the printer
Set NETWORK to ENABLE in the printer’s MENU1.
Set TCP/IP to ENABLE in the printer’s Menu2 and set
the IP address.
For how to set these, refer to “Setting TCP/IP” on
page 59.
Note: If you make a mistake in setting IP address,
a fatal error will occur on the network.
Please consult the network administrator
and determine the address to be assigned.
If you are planning a small LAN composed of one
Windows 95/98 computer and one printer connected
over Ethernet, please do the following setting. You
must make sure that these are not connected to other
network(s). If you try the following setting when these
are connected to other network, a fatal error will occur
on the network:
IP address: The top values are fixed to 192.168.0. The
fourth value is any value between 1 to 254.
Subnet mask: 255.255.255.0. fixed
Gateway address: 0.0.0.0. fixed
Setting Windows 95/98/NT4.0/2000/Me
Setting network adapter
Please refer to the manual for each network adapter
driver and set it.
Setting TCP/IP
1. Open [Control Panel] and double-click on
[Network].
2. Check if configuration elements of [TCP/IP] are
in [Current Network Configuration] of the [Set
3100euGB.book Page 68 Friday, March 16, 2001 1:18 PM