Netware 3.x environment, Netware 4.x and 5 nds environment – Oki lan 3100e User Manual
Page 39
English
Chapter 3 - Network Setup
33
6.
If you cannot find it in the list, click on [Add
port...], and click on [Browse] from the [Add
port] screen to select.
NetWare 3.x environment
Setting Control Panel
1.
From
[Control
Panel],
double-click
on
[Network].
2.
Make sure that the following items are in the
configuration of the [Network setup]. If not, click
on [Add...] to add them.
(a)
NetWare Network Client
(b)
IPX /SPX Compatible Protocol
3.
From the [Current network configuration:] list,
select [IPX/SPX Compatible Protocol] and open
[Properties].
4.
Check [NetWare network client] in [Bind] of the
[IPX/SPX Compatible Protocol’s Properties]. If
there are other network items, check other
network items too, according to the network
environment.
Adding a printer
Refer to “Windows NT Server 4.0 environment” on
page 32.
Setting up a printer
Refer to “Windows NT Server 4.0 environment” on
page 32.
NetWare 4.x and 5 NDS environment
Setting Control Panel
1.
From
[Control
Panel],
double-click
on
[Network].
2.
Make sure that the following items are in the
configuration of the [Network setup]. If not, click
on [Add...] to add them.
(a)
Novell NetWare Client 32 (provided by
Novell Corp.)
(b)
IPX 32-bit Protocol for Novell NetWare
Client 32 (provided by Novell Corp.)
3.
Log in to the NDS Tree when Windows95/98/Me
is rebooted.
3100euGB.book Page 33 Friday, March 16, 2001 1:18 PM