Oki lan 3100e - Manual (Page 20)

14 OkiLAN 320e Network Card
2. Right-click the installed printer and select
[Sharing…].
3. Select [Shared] and enter a suitable printer name
in the [Share Name:] text box.
4. Click on [OK] and end setting up.
NetWare3.x file server
Setting up remote printer mode
This section describes connecting the network card to
an existing print server. To create a print server, please
refer to the NetWare manual.
Preparation
1. Log in to file server by the supervisor account (or
user name which has a supervisor privilege).
2. Run PCONSOLE.
Creating print queue
If an already existing print queue is to be used, go to
“Registering a printer in a print queue” on page 15.
1. Open [Print Queue Information] from [Available
Options] and press [Insert] in [Print Queues].
2. Type a name of print queue you are going to
create in the text box [New Print Queue Name:].
Make sure not to use an already existing print
queue name.
3. Push the ESC key to return to the [Available
Options] window.
Registering a print queue to the print server
1. From [Available Options], select and open [Print
Queue Information].
2. Select the desired print queue from [Print
Queues] and press the Enter key.
3. From [Print Queue Information], select [Queue
Servers] and press the Enter key. The [Queue
Servers] window will open.
4. Press the Insert key in the window. The [Queue
Server Candidates] window will open.
5. Select the print server to be connected from the
window and press the Enter key.
6. Press the ESC key to return to the [Available
Options] window.
3100euGB.book Page 14 Friday, March 16, 2001 1:18 PM