Oki lan 3100e - Manual (Page 58)

52 OkiLAN 3100e Network Card
2. Change the settings.
OkiPage>set protocol [RET]
<>
T C P/ IP =1; Ne tW a re=2 ; E the rTal k=3
NetBEUI=4; SNMP Trap=5EXIT=0 : 2 [RET]Will you use NetBEUI ? (y/n) : y [RET]Enter “n” if you will not use NetBEUI.Computer Name(1-15char) : OP04106C
[RET]W o r k g r o u pn a m e ( 1 - 1 5 c h a r ):OKIDATA04106C [RET]Comment(1-48 char) : OKIDATA Print
Server [RET]Are you re-setting ? (y/n) : n [RET]OkiPage> logout (or exit, quit) [RET]Enter an appropriate command, without logging out, if
you want to set other protocols.Setting SNMP environmentDisplay/set the SNMP environment.DisplayCommand to use:showprotocolorshproTarget account:General users and
administrator userSetCommand to use:set protocol or seproTarget account:Administrator userThe SNMP environment has the following items to be set:System Contact: Set the contact information of the printer.
System Name: Set the name information of the printer.
System Location: Set the location information of the printer.
Trap Community: Set the Trap Community of the printer.
Trap Destination: Set the Trap Destination address of theprinter.
Trap Usage: Set the Trap enable or disable.
Trap events: Specify the events to send Trap.Setting procedureHere, the setting procedure is explained using an
example, using the setting values shown below:ItemSetting valueSystem Contactwww.okieurope.comSystem NameOKIPAGE 14iSystem Locationconference roomTrap CommunitypublicTrap Destination192.168.0.100
00000000-00808704106CTrap events(ALL)3100euGB.book Page 52 Friday, March 16, 2001 1:18 PM Pages: 1 … 56 57 58 59 60 … 104 wrong Brand wrong Model non readable See also other documents in the category Oki Hardware: VK2000 (11 pages) MSM66201 (31 pages) RS232-C (1 page) 7300e (141 pages) 6120i (219 pages) 70047601 (1 page) POSTSCRIPT 3TM 70049601 (2 pages) lan 310Eplus (2 pages) JOB60851 (67 pages) 70037501 (16 pages) MSM83C154S (36 pages) lan 7100e+ (50 pages) lan 6020E (226 pages) 70037301 (16 pages) 70043501 (20 pages) Telephony Adapter (30 pages) C6100dn (128 pages) 59375102 (12 pages) BMG7011 (70 pages) 3100e (104 pages) 8100e (106 pages) lan 8100e (140 pages) 70043502 (16 pages) 1.2 (60 pages) Sitemap
T C P/ IP =1; Ne tW a re=2 ; E the rTal k=3
NetBEUI=4; SNMP Trap=5
EXIT=0 : 2 [RET]
Will you use NetBEUI ? (y/n) : y [RET]
Enter “n” if you will not use NetBEUI.
Computer Name(1-15char) : OP04106C
[RET]
W o r k g r o u p n a m e ( 1 - 1 5 c h a r ) :
OKIDATA04106C [RET]
Comment(1-48 char) : OKIDATA Print
Server [RET]
Are you re-setting ? (y/n) : n [RET]
OkiPage> logout (or exit, quit) [RET]
Enter an appropriate command, without logging out, if
you want to set other protocols.
Setting SNMP environment
Display/set the SNMP environment.
Display Command to use: show protocol or
shpro
Target account: General users and
administrator user
Set Command to use: set protocol or sepro
Target account: Administrator user
The SNMP environment has the following items to be set:
System Contact: Set the contact information of the printer.
System Name: Set the name information of the printer.
System Location: Set the location information of the printer.
Trap Community: Set the Trap Community of the printer.
Trap Destination: Set the Trap Destination address of the
printer.
Trap Usage: Set the Trap enable or disable.
Trap events: Specify the events to send Trap.
Setting procedure
Here, the setting procedure is explained using an
example, using the setting values shown below:
Item Setting value
System Contact www.okieurope.com
System Name OKIPAGE 14i
System Location conference room
Trap Community public
Trap Destination 192.168.0.100
00000000-00808704106C
Trap events (ALL)
3100euGB.book Page 52 Friday, March 16, 2001 1:18 PM