Oki lan 3100e - Manual (Page 62)

56 OkiLAN 3100e Network Card
2. Select the object the settings of which you wish
to change in [MIB Object ID] and click on [Start
Query].
3. If you click the currently set values in [MIB
Values] window, the current values are displayed
in [MIB Instance] text box and [SNMP Set Value]
text box.
4. Enter a value(s) to be set in [SNMP Set Value]
text box and click on [Set]. The setting is
changed.
5. If the setting is successful, [Set has completed
successfully] is displayed in [Messages] window.
Click on [Start Query] once more and, if the set
values that have been changed are displayed in
[MIB Values] window, that means the setting has
been completed.
Note: For Read Only objects, even if you click the
set values in [MIB Values] window, no
values are displayed in [SNMP Set Value]
text box, nor can you enter a value. If you
enter an incorrect value, [SNMP set failed:
The value given has incorrect type or length]
is displayed in [Messages]. Re-enter a
correct value.
HP JetAdmin software
This section contains instructions and information on
how to configure and obtain diagnostic information
using the Hewlett Packard JetAdmin software.
Software requirements:
• JetAdmin 2.4, 2.5, 3.02, 3.30, or 3.40
• Windows 95/98/2000/Me or Windows NT
Note 1: For more information on installing and
usi n g H P J e t Adm i n, ref e r t o t he H P
JetAdmin documentation.
Note 2: For information on Hp JetAdmin 6.0/6.1,
please refer to the WebJetAdmin directory
on the CD-ROM.
Setting NetWare environment
1. From the main JetAdmin screen, select the
Okipage 14i you want to configure.
2. Select [Modify] from the [Device] menu.
3. In the [Configuration] screen, select the [General]
t a b a n d e n t e r t h e p r i n t s e r v e r n a m e a n d
description.
3100euGB.book Page 56 Friday, March 16, 2001 1:18 PM