Oki lan 3100e - Manual (Page 60)

54 OkiLAN 3100e Network Card
SNMP Manager (HP OpenView)
O k i p a g e 1 4 i a n d t h i s n e t w o r k c a r d s u p p o r t
Management Information Base (MIB).
MIB is information that is sent/received between the
managing host and the devices that are managed, with
SNMP protocol, for the network management, defined
in RFC1213 (MIB II).
The structure of the MIB is expressed by Abstract
Syntax Notation One (ASN.1). Normally the results of
compilation to the C-Language source using the ASN.1
compiler are used in a management software and a
device to which it is incorporated.
Of the MIBs defined by various RFCs, Okipage 14i
supports Private MIB only.
For the Okipage 14i, please contact your local supplier
about an ASN.1 file.
By reading or rewriting MIB values using the various
SNMP tools that use the SNMP protocol, you can
manage printers on the network. This user guide
explains how to refer to, set and change MIB, using the
Open View Network Node Manager of Hewlet Packard
Corporation.
MIBs set values and changing set values
MIBs set values
Using the Network Node Manager attached to the HP
OpenView, you can check the current settings of the
main unit of the Okipage 14i printer connected to the
network or network card.
1. Start Network Node Manager.
2. Open [IP Map] of the segment to which the
printer is connected.
3. Devices connected to that segment which have
their own IP addresses are displayed on [IP Map]
window in icons. The device(s) that is normally
operating is in green icon and those, which are
not, are displayed in red icon.
4. Click once on the IP address icon of the Okipage
14i you want to reference. The surroundings of
the icon will turn grey. After making sure that the
icon’s surroundings have turned grey, double
click on the icon.
5. Pull down the [Monitor] menu and select
[Browse MIB: SNMP...] from [MIB Values].
6. When [Browse MIB] window opens, enter
Okipage 14i IP address in [Name or IP Address]
text box.
3100euGB.book Page 54 Friday, March 16, 2001 1:18 PM