Tray paper settings – Ricoh LD335c User Manual
Page 70
User Tools (System Settings)
58
4
Tray Paper Settings
❖
❖
❖
❖ Paper Tray Priority: Copier (copier/Document Server)
You can specify the tray to supply paper for output.
Note
❒ Default: Tray 1
❒ When optional paper tray unit is installed, "Tray3" and "Tray4" is dis-
played.
❒ When optional LCT is installed, "LCT" is displayed.
❖
❖
❖
❖ Paper Tray Priority: Facsimile (facsimile)
You can specify the tray to supply paper for output.
Note
❒ Default: Tray 1
❒ When optional paper tray unit is installed, "Tray3" and "Tray4" is dis-
played.
❒ When optional LCT is installed, "LCT" is displayed.
❖
❖
❖
❖ Paper Tray Priority: Printer (printer)
You can specify the tray to supply paper for output.
Note
❒ Default: Tray 1
❒ When optional paper tray unit is installed, "Tray3" and "Tray4" is dis-
played.
❒ When optional LCT is installed, "LCT" is displayed.
❖
❖
❖
❖ Tray Paper Size:Tray 2–4
Select the size of the paper loaded in the paper tray.
Note
❒ Tray 1 uses A4Kpaper exclusively. You cannot specify any other paper
size.
❖
❖
❖
❖ The paper sizes you can set for trays are as follows:
• Auto Detect, A3
L, B4 JISL, A4K, A4L, A5K
• 11"
×17"L, 8
1
/
2
"
×14"L, 8
1
/
2
"
×11"K, 8
1
/
2
"
×11"L, 8"×13"L, 8
1
/
2
"
×13"L,
8
1
/
4
"
×13"L, 7
1
/
4
"
×10
1
/
2
"
L
Important
❒ If the specified paper size differs from the actual size of the paper loaded
in the paper tray, a misfeed might occur because the correct paper size was
not detected.
JupiterC2_GSG_EN_Pre_FM.book Page 58 Tuesday, December 28, 2004 1:39 PM