Ricoh LD335c - Manual (Page 45)

Multi-Access
33
2
Multi-Access
You can carry out another job using a different function while the current job is
being performed. Performing multiple functions simultaneously in this manner
is called “Multi-accessing”.
This allows you to handle jobs efficiently, regardless of how the machine is being
used. For example:
• While making copies, you can scan documents to store in the Document Serv-
er.
• While printing documents stored in the Document Server, the machine can
receive print data.
• You can make copies while receiving fax data.
• While printing print data, you can make operations for copying.
Note
❒ See p.55 “Print Priority” for setting function priority. As default, [Display
Mode] is set to first priority.
❒ When the 2 tray finisher or booklet finisher is installed on the machine, you
can specify the output tray where documents are delivered. For details about
how to specify the output tray for each function, see the following descrip-
tions:
• p.56 “Output: Copier (copier)”
• p.57 “Output: Document Server (Document Server)”
• p.57 “Output: Facsimile (facsimile)”
• p.57 “Output: Printer (printer)”
- - - -Function Compatibility
The chart shows Function Compatibility when print priority is set to “Inter-
leave”. See p.55 “Print Priority”.
|: Simultaneous operations are possible.
$: Operation is enabled when the relevant function key is pressed and remote
switching (of the scanner/external extension) is done.
❍: Operation is enabled when the {{{{Interrupt}}}} key is pressed to interrupt the pre-
ceding operation.
→: Operation is performed automatically once the preceding operation ends.
×: The operation must be started once the preceding operation ends. (Simulta-
neous operations are not possible.)
JupiterC2_GSG_EN_Pre_FM.book Page 33 Tuesday, December 28, 2004 1:39 PM