Ricoh LD335c - Manual (Page 69)

Settings You Can Change with User Tools
57
4
❒ Paper will be delivered to the external tray when copying onto OHP trans-
parencies, thick paper, thick paper (back side) or 12"
× 18"paper from the
bypass tray, even if you have specified not to use the external tray as the
output tray.
❒ The left tray cannot be used as the output tray for duplex printing.
❖ ❖ ❖ ❖ Output: Document Server (Document Server)
You can specify the tray to which documents are delivered.
Note
❒ Default: Standard Tray
❒ For details about output trays, see p.56 “Output: Copier (copier)”.
❒ The left tray cannot be used as the output tray for duplex printing.
❖ ❖ ❖ ❖ Output: Facsimile (facsimile)
You can specify the tray to which documents are delivered.
Note
❒ Default: Standard Tray
❒ For details about output trays, see p.56 “Output: Copier (copier)”.
❒ The left tray cannot be used as the output tray for duplex printing.
❒ If you specify the left tray as the output tray when printing, prints are de-
livered printed side up.
❖ ❖ ❖ ❖ Output: Printer (printer)
You can specify the tray to which documents are delivered.
Note
❒ Default: Standard Tray
❒ The output trays set on the printer driver have priority over the output tray
specified above.
❒ You cannot use the external tray as the output tray when making a 2 Sided
copy.
❒ For details about output trays, see p.56 “Output: Copier (copier)”.
❒ The left tray cannot be used as the output tray for duplex printing.
Output tray settings
Limitation
❒ You cannot interrupt the current stapling job even if a stapling job is specified
by a different function.
❒ When the 2 tray Finisher or booklet finisher is installed and stapling or shift-
sorting is specified for a job, the job will be delivered to the finisher shift tray,
finisher shift tray 1 or finisher shift tray 2 regardless of the output tray specified.
❒ If you use the bypass tray as the input tray, you cannot use the finisher output
tray, left tray 1 or left tray 2 as output trays.
JupiterC2_GSG_EN_Pre_FM.book Page 57 Tuesday, December 28, 2004 1:39 PM