Ricoh LD335c - Manual (Page 27)

15
ENERGY STAR Program
❖ ❖ ❖ ❖ Low-Power mode
• Low Power Mode
This product automatically lowers its power consumption 15 minutes after
the last copy or print job has finished. Printing is still possible in Low Pow-
er Mode, but if you wish to make copies press the
{{{{Energy Saver}}}} key first.
Reference
For details about how to change the default interval, see p.61 “Energy
Saver Timer”.
• Sleep Mode
This product automatically lowers its power consumption even further 60
minutes after the last copy or print job has finished. This function is called
“Sleep Mode”. Printing from computer or fax is possible in this mode, but
if you wish to make copies, press the operation switch first.
Reference
For details about how to change the default interval, see p.61 “Auto Off
Timer”.
❖ ❖ ❖ ❖ Duplex Priority
The ENERGY STAR Program recommends the duplex function. By conserv-
ing paper resources this function reduces a burden to the environment. For
applicable machines, duplex function (one-sided originals
→two-sided cop-
ies) is selected preferentially when the operation switch or the main power
switch is turned on, the
{{{{Energy Saver}}}} key is pressed, or the machine resets
automatically.
Reference
To change the settings of the Duplex Priority mode, see “Duplex Mode Pri-
ority”in “General Features P.2/5”, Copy Reference.
As an ENERGY STAR Partner, we have determined
that this machine model meets the ENERGY STAR
Guidelines for energy efficiency.
The ENERGY STAR Guidelines intend to establish an international energy-saving system for
developing and introducing energy-efficient office equipment to deal with environmental is-
sues, such as global warming.
When a product meets the ENERGY STAR Guidelines for energy efficiency, the Partner shall
place the ENERGY STAR logo onto the machine model.
This product was designed to reduce the environmental impact associated with office equip-
ment by means of energy-saving features, such as Low-power mode.
JupiterC2_GSG_EN_Pre_FM.book Page 15 Tuesday, December 28, 2004 1:39 PM