Ricoh LD335c - Manual (Page 164)

Remarks
152
6
Earth Leakage Breaker
To prevent electric shock this ma-
chine has an earth leakage breaker.
The earth leakage breaker is normally
in the on position.
Once a month, check that it functions
properly by following the procedure
below.
Important
❒ If the earth leakage breaker is not
functioning normally, contact your
sales or service representative.
AAAA
Make sure the exposure glass cov-
er or the ADF is closed.
BBBB
Turn off the power.
Reference
⇒ p.29 “Turning Off the Pow-
er”, p.29 “Turning Off the Main
Power”
CCCC
If the finisher is installed, detach
it from the machine.
Note
❒ The above illustration shows
the 2 tray finisher. If you are us-
ing the Booklet finisher, detach
it in the same way.
DDDD
Using the tip of a ball-point pen,
press the test button of the earth
leakage breaker.
EEEE
Confirm that the earth leakage
breaker switch moves to the off
position.
FFFF
Turn the switch to the on posi-
tion.
ADL015S
ADL010S
ADL012S
ADL013S
JupiterC2_GSG_EN_Pre_FM.book Page 152 Tuesday, December 28, 2004 1:39 PM