Ricoh LD335c - Manual (Page 68)

User Tools (System Settings)
56
4
❒ When the left tray, 2 tray finisher, or booklet finisher is installed on the ma-
chine, you can specify an output tray for each document to be delivered.
For details about how to specify an output tray for each function, see the
following sections:
• p.56 “Output: Copier (copier)”
• p.57 “Output: Document Server (Document Server)”
• p.57 “Output: Facsimile (facsimile)”
• p.57 “Output: Printer (printer)”
❖ ❖ ❖ ❖ Function Reset Timer
You can set the length of time the machine waits before changing modes
when using the multi-access function (see p.33 “Multi-Access”). This is useful
if you are making many copies and have to change settings for each copy. If
you set a longer reset period, you can prevent interruption from other func-
tions.
Note
❒ Default: 3 seconds
❒ The Function Reset Timer setting is ignored if [Interleave] is set for Print Pri-
ority (see p.55 “Print Priority”).
❒ When you select [Set Time], enter the time (3–30 seconds, in 1 second incre-
ments) using the number keys.
❖ ❖ ❖ ❖ Output: Copier (copier)
You can specify a tray to which documents are delivered.
• Standard Tray
• External Tray
• Finisher Shift Tray
• Finisher Shift Tray 1
• Finisher Shift Tray 2
• Left tray 1
• Left tray 2
Note
❒ Default: Standard Tray
❒ Paper will be delivered to the standard tray when making a 2 Sided copy,
even if you have specified the external tray.
AFZ007S
JupiterC2_GSG_EN_Pre_FM.book Page 56 Tuesday, December 28, 2004 1:39 PM