Ricoh LD335c - Manual (Page 31)

19
1. Getting Started
Guide to Components
1. Exposure glass cover (optional) or
Auto Document Feeder (ADF) (op-
tional)
Lower the exposure glass cover over
originals placed on the exposure glass. If
you have the ADF, load a stack of origi-
nals here. They will be fed automatically,
one by one.
(The illustration shows the ADF.)
2. Exposure glass
Place originals face down.
3. External tray
Copied, printed paper or fax messages
are delivered here.
4. Duplex reversal unit
Open this to remove misfed paper. The
upper left cover can be opened by first
opening the duplex reversal unit.
5. Earth Leakage Breaker
Prevents electric shock. See p.152 “Earth
Leakage Breaker”.
6. Ventilation holes
Prevents overheating. Do not obstruct
the ventilation holes by placing anything
near it or leaning objects against it. If the
machine overheats, an error might occur.
7. Main power switch
If the machine does not operate after
turning on the operation switch, check
the main power switch is turned on. If it
is off, turn it on.
8. Operation switch
Press this switch to turn the power on
(the On indicator lights up). To turn the
power off, press this switch again (the On
indicator goes off).
AFZ029S
JupiterC2_GSG_EN_Pre_FM.book Page 19 Tuesday, December 28, 2004 1:39 PM