Roland SH-32 - Manual (Page 35)

35
Modifying the Sound
Quick Start
Saving the Sound
Sound created on the SH-32 relies on a unique interaction of several parameters, so
it’s a good idea to save your sound settings whenever you achieve something you
like, and may want to use later. You can save as many as 128 different sound settings
on the SH-32.
fig.021
1
When you’ve reached the point where you have a sound you want to
save, press [WRITE].
[WRITE] lights up, and a Patch number blinks in the display.
2
Press [VALUE ▼ / ▲ ] to select the place where you want to save your
Patch ([A11]–[B88]).
3
Press [WRITE].
The “ ” (Sure?) confirmation message appears in the display. To cancel the save,
press [EXIT].
4
Press [WRITE] again.
First, “ ” (Ok) blinks in the display, then the display returns to its original state.
The sound is now saved to the selected Patch number.
Display 2 1, 3, 4
You can also select a Patch
number by pressing [BANK],
selecting a bank with [1/A] or
[2/B], and then selecting the
save destination with [1/A]–
[8/R].