Roland SH-32 - Manual (Page 24)

24
Producing Sound
Using the Effects
The SH-32 comes with two independent effects processors; one of them provides
spatial effects such as reverb and delay (Reverb/Delay), while the other is used for
inserting distortion, phaser, tremolo, and various other effects (Insertion Effects).
Effects can be switched on or off at the touch of a button.
fig.006
1
Press [INS-FX] or [REV/DELAY].
When you press [INS-FX], the button lights up, and the Insertion Effects is turned on.
When you press [REV/DELAY], the button lights up, and the Reverb/Delay is
turned on.
The Insertion Effects and Reverb/Delay can be used at the same time.
How to Turn Off the Effects
Press [INS-FX] or [REV/DELAY] to turn them off.
See “Chapter 3. Applying
Effects to the Sound (INS-
FX, REV/DELAY)” (p. 64) for
details on effects.
1
You can set the type, intensity,
and other details (p. 34).