Roland SH-32 - Manual (Page 33)

33
Modifying the Sound
Quick Start
3
Press [DESTINATION] to set the destination for which the modulation
depth is to be set by means of [DEPTH].
The indicator of the selected destination lights up. To select a destination on the
lower row, get the two indicators above the name to light.
fig.019
The manner in which sound changes depends on the destination of the LFO.
OSC 1,2
Adds an effect to the pitch of the waveform, creating a vibrato effect.
FILTER
Adds an effect to the Cutoff Point of the filter, creating a wah effect.
AMP
Adds an effect to the amp, creating a tremolo effect.
PAN
Applies an effect to the left/right positioning of sound, creating an auto-pan effect.
4
Turn [DEPTH] to set the depth of the LFO effect.
The effect increases as you turn the knob clockwise.
5
Turn [RATE] to adjust the frequency (speed) of the LFO.
The speed becomes faster as you turn the knob clockwise, and slower when you turn
it counterclockwise.
The destination
The destination
See “Adjusting the
Modulation Depth
(DESTINATION, DEPTH)” (p.
60) for details on the effects.
You can add one LFO effect to
several destinations.
You can also synchronize the
LFO with the tempo (BPM) (p.
61).