Renesas R61509V - Manual (Page 170)

R61509V Target Spec
Rev. 0.11 April 25, 2008, page 170 of 181
Step-up Circuit Characteristics
Table 84
Item Unit Test condition Min. Typ. Max. Note
DDVDH V
IOVCC=VCC=VCI=2.80[V], fosc=678[kHz], Ta=25℃,
VC=3’h1, AP=3’h3, BT=3’h2, DC0=3’h4 (div. 1/8),
DC1=3’h2 (div. 1/4), COL=0, D=2’h0,
C11=C12=C13=C21=C22=1[uF]/B characteristics,
DDVDH=VGH=VGL=VCL=1[uF]/B characteristics,
Iload1=-3 [mA], No load on the panel.
4.8 5.1 - -
VGH V
IOVCC=VCC=VCI=2.80[V], fosc=678[kHz], Ta=25℃,
VC=3’h1, AP=3’h3, BT=3’h2, DC0=3’h4 (div. 1/8),
DC1=3’h2 (div. 1/4), COL=0, D=2’h0,
C11=C12=C13=C21=C22=1[uF]/B characteristics,
DDVDH=VGH=VGL=VCL=1[uF]/B characteristics,
Iload2=-100[uA], No load on the panel.
14.4 15.1 - -
VGL V
IOVCC=VCC=VCI=2.80[V], fosc=678[kHz], Ta=25℃,
VC=3’h1, AP=3’h3, BT=3’h2, DC0=3’h4 (div. 1/8),
DC1=3’h2 (div. 1/4), COL=0, D=2’h0,
C11=C12=C13=C21=C22=1[uF]/B characteristics,
DDVDH=VGH=VGL=VCL=1[uF]/B characteristics,
Iload3=+100[uA], No load on the panel.
- -10.0 -9.6 -
Step-up
output
voltage
VCLV V
IOVCC=VCC=VCI=2.80[V], fosc=678[kHz], Ta=25℃,
VC=3’h1, AP=3’h3, BT=3’h2, DC0=3’h4 (div. 1/8),
DC1=3’h2 (div. 1/4), COL=0, D=2’h0,
C11=C12=C13=C21=C22=1[uF]/B characteristics,
DDVDH=VGH=VGL=VCL=1[uF]/B characteristics,
Iload4=+200[uA], No load on the panel.
- -2.55 -2.4 -
Internal Reference Voltage: Condition
(VCC= 2.50V~3.30V, Ta= -40°C~+85°C)
Table 85
Item Symbol Unit Min. Typ. Max. Note
Internal reference
voltage
VCIR
V
- 2.50 - 12