Ricoh AFICIO MP01 - Manual (Page 98)

USING THE OPTIONS
4-22
Replacing the Staple Cartridge
Replace the staple cartridge when “Add Staple Finisher” message appears on
the printer Control Panel. Each staple cartridge holds 2,000 staples.
Follow these steps to replace the staple cartridge.
1 Use the recessed handle on the
Finisher door to pull the Finisher
unit out of the Finisher housing.
2 Remove the empty staple cartridge
using the green clips on either side
of the cartridge.
3
Remove all tape and other packaging material from the new staple cartridge.
4
Insert the new cartridge in the
bracket and push it in until it snaps
into place.
5 Push the Finisher unit back into the Finisher housing.