Ricoh AFICIO MP01 - Manual (Page 89)

USING THE OPTIONS
4-13
USING THE OPTIONS
8 Lower the pressure bar so that it
rests on top of the stack of
envelopes.
9
Open the Front Cover.
j
Pull the lever down to the left so
you can see the
* mark under it
as shown. Then,close the Front
Cover.
Important: Be sure to return the
lever to its original position after
finishing the envelope printing job.
k Open the External Tray, or specify
the output destination as Shift Tray
Face-up.
Note:The Shift Tray is available
only when the optional Finisher is
installed.
l
To output to the Shift Tray, you must select Shift Tray Face-up as the output
destination,using your application, your printer driver, or Control Panel.