beautypg.com

Error messages – Roland JUNO-Di User Manual

Page 92

background image

92

Error Messages

If an incorrect operation is performed, or if processing could not be performed as you specified, an error message will appear.

Refer to the explanation for the error message that appears, and take the appropriate action.

Message

Meaning

Action

USB Mem Not Ready!

USB memory is not connected.

Connect USB memory.

Read Error!

Failed to load data from USB memory.

Make sure that USB memory is correctly connected.

It may be that the file is damaged.

Do not use this file.

This file cannot be loaded since its format is incorrect.

Do not use this file.

The target file was not found in USB memory.

Make sure that the target file exists in USB memory.

Write Error!

Failed to write data to USB memory.

Make sure that USB memory is correctly connected.

Data cannot be written because the USB memory has no
more free space.

Delete unneeded files from the USB memory. Alternatively, use a
different USB memory device, one that has more free space available.

The file or the USB memory itself is write protected.

Make sure that the file or the USB memory is not write protected.

Incorrect File!

This is a file that the JUNO-Di is unable to play.

Do not use this file.

This song has not been transferred from Playlist Editor to USB
memory.

Select the song for transfer from Playlist Editor, and transfer the data
once again to USB memory.

Playback is not possible, since you have exceeded the
number of songs that the JUNO-Di can handle.

The JUNO-Di can handle up to 99 songs in the root directory, and a
total of up to 399 songs in all other playlists.

Sys Mem Damaged!

It is possible that the contents of system memory have been
damaged.

Please execute a Factory Reset.
If this does not resolve the problem, contact your dealer or a nearby
Roland service center.

MIDI Buffer Full!

An unusually large amount of MIDI data was received, and
could not be processed.

Reduce the amount of MIDI messages that are being transmitted.

MIDI Offline!

The MIDI IN connection was broken.

Check that there is no problem with the MIDI cable connected to the
JUNO-Di’s MIDI IN, and that the MIDI cable was not disconnected.

Now Playing!

The Song Player is currently playing.

Either stop playback, or wait until playback has ended.

Battery Low!

The battery has run down.

Recharge the batteries, or use an AC adaptor.

No More Favorites!

No more favorites have been registered.

Check the currently selected favorite number and the direction
(“FAV-UP” or “FAV-DOWN”) that’s assigned to the pedal (p. 76).

JUNO-Di_e.book 92 ページ 2009年6月22日 月曜日 午前9時23分