Roland JUNO-Di - Manual (Page 101)

101
Effects List
A stereo delay in which the delay time can be varied smoothly.
A delay in which the delay time can be varied smoothly, and allowing an
extended delay to be produced.
This is a monaural delay.
A virtual tape echo that produces a realistic tape delay sound. This
simulates the tape echo section of a Roland RE-201 Space Echo.
In addition to a lo-fi effect, this adds various types of noise such as white
noise and disc noise.
This is an effect that intentionally degrades the sound quality for creative
purposes.
In addition to a Lo-Fi effect, this effect also generates radio noise.
This effect produces a muffled sound, like that heard through a telephone.
Simulates a sound recorded on an analog record and played back on a
record player. This effect also simulates the various types of noise that are
typical of a record, and even the rotational irregularities of an old
turntable.
A stereo pitch shifter.
53: ANALOG DELAY
Item Value Description
Delay Time 0–1300 msec, note
Adjusts the time until the delay is
heard.
Feedback -98–+98%
Adjusts the amount of the delay
that’s fed back into the effect.
Negative (-) settings invert the phase.
Balance D100:0W–D0:100W
Volume balance between the direct
sound (D) and the delay sound (W)
54: ANALOG LONG DELAY
Item Value Description
Delay Time
0–2600 msec,
note
Adjusts the time until the delay is heard.
Feedback -98–+98%
Adjusts the amount of the delay that’s fed
back into the effect.
Negative (-) settings invert the phase.
Balance
D100:0W–
D0:100W Volume balance between the direct sound (D)
and the delay sound (W)
55: TAPE ECHO
Item Value Description
Repeat Rate 0–127
Tape speed
Increasing this value will shorten the
spacing of the delayed sounds.
Intensity 0–127 Amount of delay repeats
Echo Level 0–127 Volume of the echo sound
56: LOFI NOISE
Item Value Description
Noise Level 0–127 Volume of the white noise
Disc Nois
Level
0–127 Volume of the record noise
Level 0–127 Output level
57: LOFI COMPRESS
Item Value Description
Level 0–127 Output level
58: LOFI RADIO
Item Value Description
Radio
Detune
0–127
Simulates the tuning noise of a radio. As this
value is raised, the tuning drifts further.
Radio Noise
Lev
0–127 Volume of the radio noise
Level 0–127 Output level
59: TELEPHONE
Item Value Description
Level 0–127 Output level
60: PHONOGRAPH
Item Value Description
Total Noise
Lev
0–127 Volume of overall noise
Total Wow/
Flutr
0–127 Depth of overall rotational irregularity
Level 0–127 Output level
61: PITCH SHIFTER
Item Value Description
Coarse -24–+12 semi
Adjusts the pitch of the pitch
shifted sound in semitone steps.
Balance D100:0W–D0:100W
Volume balance between the
direct sound (D) and the pitch
shifted sound (W)
JUNO-Di_e.book 101 ページ ２００９年６月２２日 月曜日 午前９時２３分