Roland JUNO-Di - Manual (Page 74)

74
Song Player Settings
Rhythm Pattern:
A rhythm pattern is a fixed phrase played by rhythm
instruments such as drums or percussion.
The JUNO-Di contains rhythm patterns for a wide range of
styles. It’s easy to play back these rhythm patterns while you
play along on the keyboard.
Rhythm Pattern Group:
Even within rhythm patterns of the same musical style, the
JUNO-Di provides a variety ranging from sparse, minimal
patterns to flamboyant, “busy” patterns. A “rhythm pattern
group” is a set of different rhythm patterns in the same style.
“Rhythm Pattern Group List” (p. 124)
1. Press the [RHYTHM PATTERN] button so it’s lit.
The “RHYTHM PATTERN” screen will appear.
fig.disp-RhyPat.eps_70
2. Press the [PLAY/STOP] button.
The rhythm pattern will begin playing.
3. Use the [1]–[6] buttons or [ ] [ ]
buttons to select a rhythm pattern.
The button corresponding to the currently playing rhythm pattern
will blink.
You can also play the rhythm pattern by pressing a button
from [1] through [6] instead of pressing the [PLAY/STOP]
button in step 2.
4. To stop the rhythm pattern, press the [PLAY/STOP]
button.
You can also stop the rhythm pattern by pressing the blinking [1]–
[6] button.
The arpeggio settings “Grid” and “Duration” (p. 67, p. 68) are
used when playing the rhythm pattern.
If you want to select a rhythm pattern of a different style, change the
rhythm pattern group.
When you change the rhythm pattern group, the rhythm patterns
assigned to the [1]–[6] buttons will also change.
The rhythm set used to play a rhythm pattern is determined by the
rhythm pattern group, but you are free to change the rhythm set if
desired.
The rhythm pattern settings cannot be saved.
1. Press the [RHYTHM PATTERN] button so it’s lit.
The “RHYTHM PATTERN” screen will appear.
2. Use the [ ] [ ] button to move the cursor to the
middle line of the screen, and use the dial to select a
rhythm pattern group.
Value: 001–024
When you select a rhythm pattern group, the most suitable rhythm
set will be selected.
3. Use the [ ] button to move the cursor to the bottom
line of the screen, and use the dial to select a rhythm set.
Value: Rh001–
The volume setting of the rhythm pattern cannot be saved.
1. Press the [LEVEL] button.
The level setting is shown in the top of the screen.
fig.disp-RhyPat.eps_70
2. Use the dial to adjust the volume.
The volume of the rhythm pattern will change.
Value: 1–127
3. Press the [EXIT] button to return to the previous screen.
Playing Rhythm Patterns
([RHYTHM PATTERN] Button)
Playing Rhythm Patterns
Changing the Style or Rhythm Set of the
Rhythm Pattern
Adjusting the Volume of the Rhythm Pattern
JUNO-Di_e.book 74 ページ ２００９年６月２２日 月曜日 午前９時２３分