Roland JUNO-Di - Manual (Page 77)

77
Other Settings
Utility functions let you save user data to USB memory or restore data
from USB memory back to the JUNO-Di. You’ll also use these utility
functions when you want to return the JUNO-Di to its factory settings, or
initialize USB memory.
Connect your USB memory after you’ve turned the JUNO-Di’s
power on. Never disconnect the USB memory while the power
is turned on.
Use USB memory sold by Roland. We cannot guarantee correct
operation if other products are used.
When you save settings from the JUNO-Di to USB memory, the following
settings are saved.
• User data for tones and performances
• Favorites
• MIDI Controller mode settings
• The tones that are selected first by each tone button
• System settings
Here’s how to save user data to USB memory. This operation is called
“Backup.”
1. Press the [MENU] button.
The “MENU” screen will appear.
2. Use the [ ] [ ] buttons to select “UTILITY,” and press
the [ENTER] button.
The “UTILITY” screen will appear.
fig.disp-uility.eps_70
3. Use the [ ] [ ] buttons to select “BACKUP,” and
press the [ENTER] button.
The following screen will appear.
fig.disp-utilbackup.eps_70
4. Press the [ENTER] button.
If you decide to cancel, press the [EXIT] button.
When the backup has been completed, you will return to the
“UTILITY” screen.
Here’s how to restore backed-up user data from USB memory into the
JUNO-Di. This operation is called “Restore.”
All user data will be rewritten when you execute the Restore
operation. If the JUNO-Di contains important data that you
want to keep, you must save it to a separate USB memory
device before you execute Restore.
1. Press the [MENU] button.
The “MENU” screen will appear.
2. Use the [ ] [ ] buttons to select “UTILITY,” and press
the [ENTER] button.
The “UTILITY” screen will appear.
3. Use the [ ] [ ] buttons to select “RESTORE,” and
press the [ENTER] button.
The following screen will appear.
fig.disp-utilrestore.eps_70
4. Press the [ENTER] button.
If you decide to cancel, press the [EXIT] button.
When the restore operation has been completed, the following
screen will appear.
fig.disp-restorecomp.eps
5. Turn the power of the JUNO-Di off, then on again.
Backing Up or Initializing Data
(UTILITY)
Types of Data that can be Saved
Saving Data to USB Memory (BACKUP)
Restoring Saved Data from USB Memory
Back into the JUNO-Di (RESTORE)
JUNO-Di_e.book 77 ページ ２００９年６月２２日 月曜日 午前９時２３分