Roland JUNO-Di - Manual (Page 33)

33
Playing R&B
R&B Split
Play the sample score.
Playing with a Different Tone for Each Hand—[SPLIT] Button
The “Split” function enables you to play with a different tone for each hand.
After selecting a tone for the right hand, press the [SPLIT] button to divide the keyboard into two sections.
Next, select a tone for the left hand.
When you press the [SPLIT] button once, it lit to show that Split is turned on.
When you press the [SPLIT] button again, the light turns off to show that Split is turned off.
Playing
Important
Function
When you are using the Split function, follow these steps to change the split point:
1.
When the [SPLIT] button is lit, hold down the [SPLIT] button and press the key where you want to
set the split point.
The pressed key becomes the split point.
The UPPER section starts from the split point.
2.
When you have finished making settings, press the [EXIT] button.
Operation Changing the point where the keyboard is divided (the split point)
=92
JUNO-Di_e.book 33 ページ ２００９年６月２２日 月曜日 午前９時２３分