Roland JUNO-Di - Manual (Page 70)

70
Detailed Settings for Performance Functions
V-LINK ( ) is a function that allows music and images to
be performed together. By using MIDI to connect two or more V-LINK
compatible devices, you can easily enjoy performing a wide range of
visual effects that are linked to the expressive elements of a music
performance.
For example if you use the JUNO-Di in conjunction with Edirol P-10, you’ll
be able to do the following things.
• Use the JUNO-Di’s keyboard (the far-left octave) to switch images.
• Use the JUNO-Di’s pitch bend lever to control the image playback
speed.
• You can use the JUNO-Di’s knobs to control the brightness and hue of
the image.
As an example, we will use a setup in which the JUNO-Di is connected to
the EDIROL P-10. Use a MIDI cable to connect the JUNO-Di’s MIDI OUT
connector to the MIDI IN connector of the EDIROL P-10.
Before connecting this unit to other devices, turn off the power
to all units. This will help prevent malfunctions and/or damage
to speakers or other devices.
fig.VlinkP10.eps
1. Press the [V-LINK] button so it’s lit.
The “V-LINK” screen appears, and the V-LINK setting will be on.
fig.disp–Vlink.eps
Operations on the JUNO-Di
By operating the JUNO-Di’s keyboard and knobs, you can control the
image along with your performance on the JUNO-Di.
2. With the “V-LINK” screen shown, press the [V-LINK]
button again.
The [V-LINK] button will go dark, and the V-LINK setting will be off.
1. Press the [V-LINK] button to access the “V-LINK” screen.
The “V-LINK” screen will appear.
fig.disp–Vlink.eps
2. Use the [ ] [ ] buttons to move the cursor to the
parameter you want to edit.
3. Use the dial to set the value.
The changes you make will be saved when you leave the “V-
LINK” screen.
Using the Keyboard to Control
Images ([V-LINK] Button)
What is V-LINK?
Connection Example
EDIROL P-10
MIDI OUT
MIDI IN
JUNO-Di
Turning the V-LINK ON/OFF
Button/Knob/Keyboard Description
Keys (leftmost octave) Switch images.
[CUTOFF] knob Controls the hue and brightness.
[RESONANCE] knob Controls the saturation.
[REVERB] knob Controls the image switching time.
Pitch Bend lever Controls the playback speed.
V-LINK Settings
Item Value Description
Tx Channel 1–16
MIDI channel that will control the
V-LINK device.
Speed Ctrl
0-1-2, 0.5-1-2, 0-1-4,
0.5-1-4, 0-1-8, 0.5-1-8,
0-1-16, 0.5-1-16, 0-1-32,
0.5-1-32, 0-2-4, 0-4-8,
0-8-16, 0-16-32, (-1)-0-1,
(-2)-1-4, (-6)-1-8
Range of video playback speed
The three values are the playback
speeds (multiples of normal speed)
at the left, center, and right
positions of the pitch bend.
JUNO-Di_e.book 70 ページ ２００９年６月２２日 月曜日 午前９時２３分