beautypg.com

Roland UA-25 User Manual

Page 62

background image

62

Troubleshooting

Depending on the virtual memory setting or network-related settings, noise
may occur.

Please make the following settings before use.

[Mac OS 9]

In Chooser of the

Apple menu

, set AppleTalk to

“Inactive.”

(This setting is not changed as a result of turning off AppleTalk, as requested
by OMS when sequencer software is started up. You must change the setting
yourself using the

“Chooser.”

)

[Mac OS 9]

In the

“Memory” Control Panel

, set

Virtual Memory

to

“Off.”

• Depending on the way in which you connect to the Internet, use the UA-25

with the following settings.

If you connect to the Internet via a LAN cable

Use while the LAN cable is connected.

If you connect to the Internet via the internal modem port, or are not
connected to the Internet

In the

“TCP/IP”

Control Panel, set

“Connect via”

to

“PPP.”

After you have made the settings, restart your Macintosh.

* Do not use software that accesses the network (such as a Web browser) at the same time

that you are using sequencer software or audio editing software.

While you were using the UA-25, could your computer have performed a task
with a heavy processing load, such as accessing a CD-ROM drive or network?

If a heavy processing load occurs while the UA-25 is being used, it may not work
correctly. In this case, stop playback/recording, and then start playback/recording
once again. If you are still unable to play/record correctly, close all software that had
been using the UA-25, and re-connect the UA-25.

Is the sample rate setting in your software the same as the sample rate of the
digital device connected to the digital input connector?

Set your software and the UA-25 to the same sample rate.
If you change the UA-25’s sample rate, you must disconnect the USB cable that connects
the UA-25 to your computer, and then re-connect the USB cable in order for the new
setting to take effect.

Playback/recording stops midway, and subsequent playback/recording is
not possible

Digitally recorded sound has distortion, the wrong pitch, or contains noise

UA-25e.book 62 ページ 2005年10月31日 月曜日 午後4時48分