Roland UA-25 - Manual (Page 20)

20
Driver installation and settings (Windows)
1
Disconnect all USB cables except for a USB keyboard and
USB mouse (if used).
2
Open the System Properties dialog box.
Click the Windows Start button, and from the menu that
appears, select Settings | Control Panel . In Control
Panel , double-click the System icon.
fig.signature-2k
3
Click the Hardware
tab, and then click
[Driver Signing] .
The Driver Signing
Options dialog box
will appear.
4
Make sure that “File signature verification” is set to
“Ignore” .
If it is set to “Ignore” , simply click [OK] .
If it is not set to “Ignore”, make a note of the current setting
(“Warn” or “Block”). Then change the setting to
“Ignore”
and click [OK] .
5
Click [OK] to close the System Properties dialog box.
6
Exit all currently running software (applications).
Also close any open windows. If you are using virus
checking or similar software, be sure to exit it as well.
7
Prepare the CD-ROM.
Insert the CD-ROM into the CD-ROM drive of your
computer.
Windows 2000 users
Log on to Windows as a user
with administrative privileges
(such as Administrator)
If you changed “File
signature verification”
, you
must restore the previous
setting after you have installed
the driver.
UA-25e.book 20 ページ ２００５年１０月３１日 月曜日 午後４時４８分