beautypg.com

Driver settings, About the input and output devices – Roland UA-25 User Manual

Page 26

background image

26

Driver installation and settings (Windows)

In order to get the best performance from the software you are using, you must
choose the correct device settings. The UA-25’s audio driver supports WDM
and ASIO 2.0.

Audio devices

MIDI devices

* For details on how to make settings for your software, you should also refer to the owner’s manual

for your software.

* If you are unable to select the UA-25 in the device settings of your software, it is possible that the

UA-25 driver was not installed correctly. Please re-install the driver.

WDM

Use this if you are using the UA-25 with the following applications or
situations.

• Conventional applications such as Media Player

(for the settings, refer to

“Input/output device settings”

(p. 27))

• WDM driver mode compatible applications such as SONAR
• DirectSound compatible applications

ASIO

Use this if you are using the UA-25 with an ASIO-compatible application such
as Cubase. In the ASIO settings of your application, choose “EDIROL UA-25.”

* To prevent audio loop feedback or double monitoring, turn monitoring off in your

application, or set your application to use ASIO Direct Monitor.

* When using the UA-25 with ASIO, we recommend that you not set your application to use the

Microsoft GS Wavetable SW Synth. (This will decrease the processing load, and make it easier to
change the driver buffer size.)

MME

Normally you should use WDM or ASIO.
Use this in the following cases when using an application that does not support
WDM driver mode or ASIO.
• Recording or playing 24-bit data

Driver settings

About the input and output devices

Audio output device

EDIROL UA-25 Out

WDM

MME EDIROL UA-25 Out

MME

Audio input device

EDIROL UA-25

WDM

MME EDIROL UA-25 In

MME

ASIO device

EDIROL UA-25

ASIO

MIDI OUT

EDIROL UA-25 MIDI OUT

If you specify EDIROL UA-25 as the output port for your sequencer
software, etc., messages will be sent from the UA-25’s MIDI OUT con-
nector.

MIDI IN

EDIROL UA-25 MIDI IN

If you specify EDIROL UA-25 as the input port for your sequencer
software, etc., messages will be received from the UA-25’s MIDI IN
connector.

UA-25e.book 26 ページ 2005年10月31日 月曜日 午後4時48分