Roland UA-25 - Manual (Page 45)

45
Basic connections and settings
This section explains basic connections and data flow for the UA-25.
Refer to the block diagram printed on the front cover of the manual as you read this
section.
* Before making connections to other equipment, turn down the volume of all your
equipment and turn off the power to avoid causing malfunctions or damaging your
speakers.
* When connection cables with resistors are used, the volume level of equipment connected
to the inputs (Input jacks) may be low. If this happens, use connection cables that do not
contain resistors, such as those from the Roland PCS series.
Use a USB cable to connect the UA-25 to your computer. MIDI data and audio data
are transferred in both directions via the USB cable.
By connecting headphones or monitor speakers as shown in the diagram below,
you can monitor the playback from your software or the sound from an instrument
or audio device connected to the UA-25.
fig.basic
Basic connections
Amplified speakers
Computer
Headphones
UA-25e.book 45 ページ ２００５年１０月３１日 月曜日 午後４時４８分