Setting the driver, Oms settings – Roland UA-25 User Manual
Page 38
38
Driver installation and settings (Macintosh)
If you are using FreeMIDI, proceed to
OMS settings
1
Set the UA-25
ADVANCE (mode select) switch
to the
ON
position.
2
Use the
USB cable
to connect the
UA-25
to your
computer
.
fig.oms-setting
3
From the CD-ROM, drag the
Driver E
(Mac OS 9) - OMS Setting
folder into
the
Opcode - OMS Applications
folder on the hard disk of your
Macintosh to copy it there.
fig.oms-setup
4
In the
Opcode - OMS Applications
folder where you installed OMS,
double-click
OMS Setup
to start it
up.
fig.apple-talk
5
If a dialog box like the
one shown here
appears, click
[Turn It
Off]
. A
confirmation
dialog box will then
appear, so click
[OK]
.
fig.setup.eps
6
The
Create a New
Studio Setup
dialog
box will appear. Click
[Cancel]
.
If you accidentally
clicked
[OK]
, click
[Cancel]
in the next
screen.
Setting the driver
This unit is equipped with a
protection circuit. A brief
interval (a few seconds) after
connecting the USB cable is
required before the unit will
operate normally.
If you are using the UA-25 in
conjunction with other MIDI
devices, make settings as
described in Readme_E.htm
located in the Driver E (Mac
OS 9)
folder of the CD-ROM.
We recommend that you turn
off AppleTalk, by selecting
Chooser from the Apple menu.
UA-25e.book 38 ページ ２００５年１０月３１日 月曜日 午後４時４８分