Roland UA-25 - Manual (Page 15)

15
Driver installation and settings (Windows)
1
Disconnect all USB cables except for a USB keyboard and
USB mouse (if used).
2
Open the System Properties dialog box.
1. Click the Windows start menu, and from the menu,
select Control Panel .
2. In “Pick a category” , click “Performance and
Maintenance” .
3. In “or pick a Control Panel icon” , click the System
icon.
g.signature
3
Click the Hardware
tab, and then click
[Driver Signing] .
Open the Driver
Signing Options
dialog box.
4
In the Driver Signing Options dialog box, make sure that
“Ignore” is selected.
If “Ignore” is selected, simply click [OK] . If “Ignore” is not
selected, make a note of the current setting (Warn or Block),
change the setting to
“Ignore” , and click [OK] .
5
Click [OK] to close the System Properties dialog box.
6
Close all currently running software (applications).
Also close all windows that are open. If you are using
software such as antivirus programs, be sure to close these
programs as well.
Installing the driver
Windows XP users
Depending on your system,
the System icon may be
displayed directly in the
Control Panel
(Classic view).
If so, double-click the System
icon.
You must log on to Windows
with a user name whose
account has administrative
privileges (e.g.,
Administrator).
If you change the “Driver
Signing Options”
setting,
change it back to the original
setting after you’ve installed
the driver.
UA-25e.book 15 ページ ２００５年１０月３１日 月曜日 午後４時４８分