RAD Data comm 10/100BaseT to STM-1/OC-3 Converter RIC-155 - Manual (Page 51)

RIC-155 Installation and Operation Manual Chapter 4 Configuration
Displaying the RIC-155 Status 4-15
4.5 Displaying the RIC-155 Status
The RIC-155 software displays the converter system and physical port information.
This section describes only status information of the RIC-155 device. For
description of RIC-155 alarms, refer to Chapter 5 .
The status information is available via the Monitoring menu.
Displaying the System Status
To display the system information:
1. Follow the path: Monitoring > System Monitoring > System Status.
The first page of the System Status screen appears (see Figure 4-17 ).
2. Type N (next) to display the second page of the System Status screen
(see Figure 4-18 ).
3. Type P (previous) to return to the first page.
RIC-155
System Status
Clock Source: .....> (Loop-Back Timing)
SW Version: ....... (1.1)
HW Version: ....... (1.0B)
BOOT Version: ..... (1.40)
System CPLD Version: ...(1.02)
POS CPLD Version: ...(255.255)
Switch device ID: (52 - 88E6063)
Switch revision ID: (1.00)
Switch SW version: (3.01)
POS device ID: .... (1 - CX29701)
POS revision ID: .. (3.00)
...(N)
ESC-prev.menu; !-main menu; &-exit
Figure 4-17. System Status Screen, Page 1
RIC-155
System Status
... (P)
POS SW version: ... (5.82)
Power Supply Type: ......> (AC)
MAC Address: ............ (0020D220A209)
IP Address: ............. (172.17.161.98)
Number of Ethernet ports:> (2)
Alarm Indication: .......> (Normal)
Hardware Status: ........ (OK)
System Up Time: ......... <:Time 00:00:00: Day 0/00/00:>
ESC-prev.menu; !-main menu; &-exit
Figure 4-18. System Status Screen, Page 2
For system alarm and log file description, refer to Chapter 5 .
Note