RAD Data comm 10/100BaseT to STM-1/OC-3 Converter RIC-155 - Manual (Page 38)

Chapter 4 Configuration RIC-155 Installation and Operation Manual
4-2 Configuring RIC-155 for Management
RIC-155
Management
1. Device Info
>
2. Host IP >
3. Manager List >
4. Management Access >
>
Please select item <1 to 4>
ESC-prev.menu; !-main menu; &-exit
Figure 4-2. Management Menu
Entering Device Information
The Device Info menu allows you to assign a name to RIC-155, give description for
the unit, define its location, and contact person. These entries may include up to
20 characters.
To enter device information:
1. Follow the path: Configuration > System Configuration > Device Info.
The Device Info menu appears (see Figure 4-3 ).
2. From the Device Info menu, select System Contact and enter name of a
contact person; select System Name and enter a name of the unit; select
System Location
and enter description of the RIC-155 location.
RIC-155
Device Info
System description (RIC-155 HW Version:xxxxx SW Version:xxxxx)
1. System contact (Contact Person)
2. System name (RIC-155)
3. System location (Location of this device)
>
ESC-prev.menu; !-main menu; &-exit
Figure 4-3. Device Info Menu