Arp tables, Uration screen appears, Figure d-23 – RAD Data comm E1 Interface Converter RIC-E1 User Manual
Page 83
RIC-E1 Installation and Operation Manual
Appendix D IR-IP Interface Module
View Menu
D-27
IR_IP
S/W Ver. 1.21 31/IR (date)
VIEW CONFIGURATION
------------------
BOOT Version
:X.XX XX.XX.XXXX
Device Name
:IP router card
System Location
:The location of this device
Contact Person
:Name of contact Person
MAC Address
: 00-20-D2-XX-XX-XX
Default Gateway
: WAN
Intrf Type
Baud(Kbps) Prot
IP Address
IP Mask
Status
.....................................................................
LAN UTP
------- Ethr
192.168.205.005 255.255.255.000 Connected
WAN V.110
FR
Not Conn.
Press any key to continue:
Figure D-23. View Configuration Screen
ARP Tables
This screen is used to display the IR-IP ARP table. This table shows the IP address
assigned to each station on the LAN (the stations are identified by their MAC
addresses).
To access the ARP Tables screen:
• From the View menu, type 2.
The ARP Tables screen appears (
IR_IP
S/W Ver. 1.21 31/IR (date)
ARP Table
---------
IP Address
MAC Address
IP Address
MAC Address
192.168.205.003
00-40-33-20-C8-3C
Press any key for exit
Figure D-24. ARP Tables Screen
Order from: Cutter Networks
Ph:727-398-5252/Fax:727-397-9610
www.bestdatasource.com