beautypg.com

Menu structure of management utility, Uick, Etup – RAD Data comm E1 Interface Converter RIC-E1 User Manual

Page 69: D-13, Ip router in accordance with the, Quick setup menu, Section, D.7 quick setup menu, Figure d-7. management utility, menu structure, Figure d-8. quick setup menu

background image

RIC-E1 Installation and Operation Manual

Appendix D IR-IP Interface Module

Quick Setup Menu

D-13

Menu Structure of Management Utility

Figure D-7

shows the menu structure of the IR-IP management utility.

Main Menu

1. Quick Setup

1. LAN IP Address
2. LAN IP Mask

3. WAN IP Address
4. WAN IP Mask

5. Default Gateway
6. DHCP Server Address

7. Read Protocol From DIP Switches

8. Protocol

1.Telenet Password

2. Telenet Activity Timeout
3. SNMP Access

4. SNMP Read Community
5. SNMP Write Community

6. SNMP Trap Community
7. SNMP Management Table

1. Device Identification

1. Device Name

2. Contact Person
3. System Location

1. New Software Download

1. Server IP Address

2. File Name
3. Total Timeout

4. Start Operation

1. Configuration and Connection
2. ARP Tables

3. Multicast Groups Table
4. Statistics

1. Ping IP Address
2. Start Pinging

3. Stop Pinging

2. View Error Log

3. Erase Configuration

4. Resets

1. Reset Device
2. Reset LAN

3. Reset WAN

2. Interface Parameters

1. LAN Status
2. WAN Status

3. WAN Throttle
4. Aging Timeout

3. Protocol Parameters (FR)

1. Self Learn
2. Maintenance Protocol

3. DLCI
4. CIR

5. EIR

3. Protocol Parameters (PPP)
1. Header and Control Field Compression

2. Protocol Field Compression
3. Authentication Protocol

4. Security Host/Guest
5. User Name To Send

6. Password To Send

7. User Name To Accept
8. Password To Accept

4. Multicast
1. Multicast Forwarding

2. Static Groups

2. Management

Access

3. Advanced Setup

4. Device Control

5. View

6. Diagnostic Tool

PING Terminal

Figure D-7. Management Utility, Menu Structure

D.7 Quick Setup Menu

The Quick Setup menu is used to select the main parameters’ values that must be
defined before you start using IR-IP.
Use the Advanced Setup menu (see the

Advanced Setup Menu

section below) to

specify values for other IR-IP configuration parameters not included in this menu.

To access the Quick Setup menu:
• From the Main menu, type 1.

The Quick Setup menu appears (

Figure D-8

).

IR_IP

S/W Ver. 1.21 31/IR (date)

Quick Setup
=====================================================================
1. LAN IP Address

:192.168.100.001

2. LAN IP Mask

:255.255.255.000

3. WAN IP Address (empty for unnumbered)

:...............

4. WAN IP Mask (empty for unnumbered)

:...............

5. Default Gateway (empty - WAN interface)

:...............

6. DHCP Server IP Address (empty for relay disabled) :...............
7. Read Protocol From DIP Switches

:[ Yes ]

8. Protocol

:[ Frame Relay ]

Press one of the numbers to select or ESC:

Figure D-8. Quick Setup Menu

Order from: Cutter Networks

Ph:727-398-5252/Fax:727-397-9610

www.bestdatasource.com