RAD Data comm E1 Interface Converter RIC-E1 - Manual (Page 77)

RIC-E1 Installation and Operation Manual Appendix D IR-IP Interface Module
Advanced Setup Menu D-21
Security Host/Guest
This option can be used to configure the IP router either as a guest unit, to be
authenticated by another router, or as a host unit, that authenticates other routers.
User Name To Send
The name by which an IP router card configured as guest identifies itself.
Password To Send
The password by which an IP router card configured as guest identifies itself.
User Name To Accept
The user name to be accepted by an IP router configured as host, when an
incoming connection request is received.
Password To Accept
The user password to be accepted by an IP router configured as host, when an
incoming connection request is received.
A typical PPP Protocol Parameters menu is shown in
Figure D-16 .
IR_IP S/W Ver. 1.21 31/IR (date)
Quick Setup
Management Access
Advanced Setup
.....................................................................
Device
identification
Interface Parameters
Protocol Parameters
=====================================================================
1. Header and Control Field Compression :[ No ]
2. Protocol Field Compression: :[ No ]
3. Authentication Protocol :[ NONE/NONE ]
4. Security Host / Guest :[ Guest ]
5. User Name To Send :.................
6. Password To Send :.................
7. User Name To Accept :.................
8. Password To Accept :.................
Press one of the numbers to select or ESC:
Figure D-16. PPP Protocol Parameters Menu
Multicast IP
The Multicast IP menu is used to specify the IP multicast frame forwarding
parameters, and to access the static multicast groups’ table.
To access the Multicast IP menu:
• From the Advanced Setup menu, press 4.
The Multicast IP menu appears ( Figure D-17 ).
Order from: Cutter Networks Ph:727-398-5252/Fax:727-397-9610 www.bestdatasource.com