Telnet inactivity timeout, Device identification menu, Dvanced – RAD Data comm E1 Interface Converter RIC-E1 User Manual
Page 73: Etup, D-17, See the, Advanced setup menu, D.9 advanced setup menu
RIC-E1 Installation and Operation Manual
Appendix D IR-IP Interface Module
Advanced Setup Menu
D-17
Telnet Inactivity Timeout
This parameter specifies the time a Telnet session is kept open when there is no
keyboard activity. When the specified time-out expires, the Telnet session is closed
and another user can access IR-IP.
D.9 Advanced Setup Menu
The Advanced Setup menu is used to select the desired group of IR-IP
configuration parameters.
The parameters accessed through Advanced Setup menu supplement the
parameters available on the Quick Setup screen, by providing control over all the
other IR-IP parameters.
To access the Advanced Setup menu:
• From the Main menu, press 3.
The Advanced Setup menu appears (
IR_IP
S/W Ver. 1.21 31/IR (date)
Quick Setup
Management Access
Advanced Setup
=====================================================================
1. Device identification
2. Interface Parameters
3. Protocol Parameters
4. Multicast IP
Press one of the numbers to select or ESC:
Figure D-12. Advanced Setup Menu
Device Identification Menu
The Device Identification menu is used to define and store in the IR-IP logistic
information: the logical name of IR-IP, information on the contact person and
device location.
To access the Device Identification menu:
• From the Advanced Setup menu, type 1.
The Device Identification menu appears (
Order from: Cutter Networks
Ph:727-398-5252/Fax:727-397-9610
www.bestdatasource.com