Rear panel – Roland EP-880 User Manual

Page 9

ENGLISH

Rear Panel

Output jacks
Allows you to output the piano’s sound to sound
reinforcement equipment to obtain a more powerful
sound. These can also be connected to a tape recorder
or other recording device to record a performance (p.
30).

HOLD socket
This is where you can connect the supplied damper
pedal that will function as Hold pedal (and sustain the
notes you are playing) with half-pedal functionality.

SOFT/HOLD 2 socket
This is where you can connect an optional DP-2, DP-6,
or BOSS FS-5U footswitch that will be used as Soft
pedal (which reduces the volume of the notes you are
playing). In “Twin Piano” mode, that footswitch acts
as Hold pedal for the left keyboard section.

MIDI

/OUT connectors

Connect to external MIDI devices to exchange
performance data (p. 30).

Cord hook
After connecting the adapter cable, wind it around the
cord hook to the right of the socket to prevent
accidental power disruptions.

DC IN connector
This where you need to connect the supplied PSB-4U
adapter. If it is damaged or out of order, be sure to
replace it with the same PSB-4U model. Do not use
other adapters as these may damage your ep 880
beyond repair.

POWER ON switch
Turns the power on/off (p. 11).

ep880.book Page 9 Wednesday, November 15, 2006 7:30 PM