Roland EP-880 - Manual (Page 32)

32
Transmitting a Performance You
Recorded
If you want to transmit a performance recorded on the
ep 880 to an external MIDI device or computer, turn this
setting “On.” If this is “Off,” the data will not be
transmitted.
If you press the [PLAY] button in step 2 of “Making MIDI-
related Settings” (p. 31), display like the following will
appear.
Value : On, OFF
Power-up default setting : OFF
If you wish to use your MIDI sequence to save the
performance, use the following procedure. In this
situation, your external sequencer is set its MIDI Thru
feature to be OFF. For details, refer to the owner’s manual
of your MIDI sequencer.
1. Connect a MIDI sequencer such as the MT series (p.
30).
2. Record the performance on the ep 880 (p. 22).
3. Set this setting to “On.”
4. Start recording with the connected MIDI device.
5. Start playback of the recorded song on the ep 880.
6. When playback ends, stop recording with the
connected MIDI device.
7. Use a connected MIDI sequencer to save the data on
a floppy disk or other media.
ep880.book Page 32 Wednesday, November 15, 2006 7:30 PM