Roland SPD-S - Manual (Page 67)

67
Chapter 6
Chapter 6 Using a CompactFlash
Memory Card
This chapter explains how to use a CompactFlash memory card.
■
Regarding Recommended CompactFlash Cards
See the leaflet (Recommended CompactFlash) that comes with the product.
Formatting a CompactFlash Card
1
To insert a CompactFlash card, carefully open the card slot cover (left-
hand side of the SPD-S).
2
Select patch mode or wave mode.
3
Press [SHIFT] and [SETUP] (CARD UTIL).
If no CompactFlash card has been inserted, “no card!” is indicated and the SPD-S returns to the
original mode.
4
Press the PAGE buttons to select “CARD FORMAT,” then press
[ENTER].
When the CompactFlash card is unformatted, only "CARD FORMAT" is displayed.
5
A “[>] to format.” indication appears. Press [>].
6
A “format, sure?” indication is displayed. Press [ENTER] to start
formatting.
While formatting is in progress, “now processing..” is displayed. Then, the SPD-S
returns to the original mode.
* When the SPD-S is powered on, do not remove the CompactFlash card before the
shutdown operation (p. 23). Doing so may corrupt the SPD-S’s data or the data on
the CompactFlash card.
* Carefully insert the CompactFlash card all the way in-until it is firmly in place.
All data on the Compact Flash
card will be erased as the
result of formatting it.
Press [PATCH] to select the
patch mode, or press [WAVE]
to select wave mode.
Do not change or delete any
files or folders that have been
generated in formatting the
CompactFlash cards, or the
SPD-S will fail to properly
recognize the card.
SPDS_e.book 67 ページ ２００４年４月１９日 月曜日 午前９時５８分