Roland SPD-S User Manual

Page 118

background image

118

Restoring the Factory Settings Using the Accompanying CD

7.

“[ENTER] to Load” appears. Release the three buttons. Next, press [ENTER].

Data transfer from the CompactFlash card to the SPD-S begins. It takes a few minutes until it is complete.

During the data transfer, do not eject the CompactFlash card from the card slot and do not switch off power to the SPD-S.
Doing so could not only destroy the data, but also cause problems for the SPD-S.

8.

“Load Completed!” appears, and the data transfer is complete. Now, eject the CompactFlash card,

power the SPD-S off, then power it on again.

SPDS_e.book 118 ページ ２００４年４月１９日　月曜日　午前９時５８分

See also other documents in the category Roland Musical Instruments: