beautypg.com

Basic operations for patch edit – Roland SPD-S User Manual

Page 32

background image

32

Chapter 1 Making a Performance/ Creating a Patch

Basic Operations for Patch Edit

This section describes the steps for setting a patch. Patch settings are made
using Patch Edit.

1

Press [PATCH] so you are in patch mode.

2

Press [-]/[+] to select a patch.

3

Press [EDIT] to go into Patch Edit.

[EDIT] lights at this time.

4

Press the PAGE buttons to select an item to be edited from those listed

below, and then press [ENTER].

To select another item after pressing [ENTER], press [EXIT].
For details on each item, see its reference page.

WAVE A

-> p. 34

WAVE B

-> p. 34

PAD CONTROL

-> p. 36

EFFECTS

-> p. 37

PATCH COMMON

-> p. 37

Listed below are patch utilities. See p. 33.

• PAD COPY
• PAD EXCHANGE
• PAD INIT (Pad Initialize)
• PATCH COPY
• PATCH EXCHANGE
• PATCH INIT (Patch Initialize)

5

Press the PAGE buttons to change the parameter for the item.

To change the individual settings for different playing surfaces, hit a playing
surface (such as a pad on the SPD-S, an external pad, or a foot switch) for
which the settings are to be changed to select it. A flashing pad indicator
indicates that the corresponding playing surface is selected.

6

While hitting the playing surface for monitoring the sound, press [-]/[+]

to change the parameter value.

7

Press [EXIT] and then repeat Steps 4 to 6 to continue Patch Edit

operations. Press [PATCH] to finish Patch Edit.

The SPD-S saves the settings (with “now writing..” indicated) and then
returns to the patch mode.

If you hold down [SHIFT] and
press [-]/[+], you can change
the patch number in steps of
10. If you hold down [+] and
press [-], or hold down [-] and
press [+], the patch number
changes quickly.

If there are any selectable
items, PAGE buttons ([<], [>]
or both) are lit.

When it is necessary to press
[ENTER], it is flashing.

While editing you can also
choose among pads/sounds
by pressing a PAGE button
while holding down [SHIFT].

If you hold down [SHIFT] and
press [FUNC], the parameter is
reset to its initial value.

SPDS_e.book 32 ページ 2004年4月19日 月曜日 午前9時58分